Airport And Heliport Light

Product Details :

• New WaveTrac™ technology reduces power consumption up to 80% compared to incandescent
• Supports universal power supply found in PRO APF in-pavement fixtures for minimized supply stock
• -40°C to +55°C operating temperature
• Innovative design for ease of installation and maintenance
• Removable nut secures glass dome to housing, allows for quick access to power supply and LED optical assembly
• Built-in leveling bosses accept standard circular bubble level
• Three screw leveling with hex head bolts
• Available in installed heights of 14 inches (350mm), 24 inches (607mm) and 30 inches (759mm)
• Compatible with 1.5" and 2" frangible couplings
• Long life LED technology with rated projected life greater than 50,000 hours at 6.6A
• Highly durable cast aluminum housing painted yellow
• 5-step constant current operation
• External power cord and ground option for non-FAA compatibility
• Arctic kit option available
• Energy-efficient arctic kit utilizes filament applied directly to the glass dome to minimize energy losses
• Frangible coupling with integral fluid barrier to prevent ambient precipitation from entering base
• LED and electronics housed in IP67 rated assembly
• RoHS compliant (except column)
• Typical fixture in-rush voltage of 1.5V

Product Details :

The CHLITE system provides an illuminated circle and H on the helicopter deck, corresponding to the existing helideck markers. The light elements inclusive the mounting plates are extremely thin (22 mm) for over-the-deck surface mounting and resistant to harsh environment and helicopter loads. The CHLITE system from Tranberg is fully compliant with CAP437, 7th Edition and confirmed by the Helicopter Certification Agency (HCA). The system guarantees a regular light element spacing, free from any junction boxes for the on deck mounting. The system is maintenance/inspection free. A double independent power supply circuit and LED bypass devices ensure, that a failure of a single LED has only a local effect. Cable routings on and under deck makes the system really flexible. If you want to upgrade your existing helideck or you need a complete new installation - this system will provide the perfect solution for your project!

• Factory sealed LED lighting element
• Easy to install: minimized installation and shut down time for the helideck
• Extremely low profile (22 mm), under the required specifications
• Versatile installation: Cable routing above deck or below deck
• Anti-slip polysiloxane system coated stainless steel and high impact resistant composite PC provide a corrosion free solution for all decks
• Anti-slip surface
• No junction boxes on the surface of the helideck
• Low power consumption
• High reliability - maintenance free for all „on“ deck components
• CAP437 Compliant 7th Edition with Amendment

Product Details :

• ETL certified
• Low profile, <0.25" (6mm) – FAA Style 3
• High strength aluminum optical assembly
• Easy to maintain – no sealant required for prism or through feed assembly replacement
• Pressure test plug for seal integrity verification
• External ground screw
• Long life LED
• Direct replacement on existing circuit
• Complies with intensity curve requirements for 3-step or 5-step circuits, 50/60 Hz
• It is recommended that caution be used during snowplow operations; use of a rubber tipped blade is recommended; fixture is not warranted against snowplow damage
• Non-arctic kit – max. fixture load 9.2W, 11.2VA, PF=0.82, isolation transformer required 10/15W
• Arctic kit – max. fixture load 39.9W, 40.9VA, PF=0.98, isolation transformer required 30/45W

Product Details :

• ETL certified
• New Wavetrac™ technology reduces power consumption up to 80% compared to incandescent
• Long life LED technology with rated projected life greater than 50,000h at 6.6 A
• Dust and watertight to IP68
• Modular design makes fixtures easy to maintain with fewer parts to stock
• Engineering Brief 67 current edition compliant dimming curve
• High frequency 400 Hz PWM helps eliminate flicker perception
• Compatible with all known CCR types
• 3.5 Crest factor ensures compatibility with Series CCRs
• 10kV/5kA surge protection
• -40°C to +85°C operating temperature ensures safe movement of aircraft in the most challenging locations
• Failure monitoring of fixtures
• 0.88 second switch-on time
• IEC Style 3, 6-13mm low protusion housing
• Low profile, <.25" (6.35mm) – FAA Style 3
• Optional arctic kit (patent pending)

Product Details :

DRC-DTZ runway lights serve runways of all categories and are also used as touchdown zone lights in CAT II and III and for RETILs application in all categories. The lights have very low energy consumption (typically 15W per side) and require minimal maintenance thanks to the lifetime of LEDs. This results in guaranteed substantial savings on investment costs as well as increased traffic efficiency and taxiways availability. Connection and operation of the lights are fully compatible with the classic airfield lighting series circuits with no need to change the CCR's, series transformers or cables. The lights are fully dimmable just like traditional halogen lights and require very low working temperature, ensuring a longer life of the components.

Product Details :

Nanhua HD30 is a Marine Helideck Perimeter LED light 5W. The body was made from stainless steel 316, IP67, Tempered Glass optic lens and corrosion resistance coating. It's a tough and reliable Outdoor LED light

Product Details :

Nanhua SL60 is a Specially designed for the lighting system of terminals/ ports/ hangar that shock resistance and corrossion resistance, with allumunium alloy body and fabulous heat emission. Available 100W / 150W/ 200W

Product Details :

Nanhua SL63 is a vibration and corrosion resistance light that is tough as heliport floodlight. Protection grade for IP67 and made of light weight allumunium alloy and good heat dissipation. With 2 power options SL631A 100W and SL631B 88W.